€11.85
Available · 10 piece · 1-3 days
€11.85*
Product information "SparkFun Artemis Module, Low Power Machine Learning BLE Cortex-M4F"
The flexibility of the Artemis module starts with our Arduino core. You can programme and use the Artemis module just like an Uno or any other Arduino. It only takes 5 minutes to get the first flash! We designed the core from scratch to make it fast and as light as possible.
Next comes the module itself. Measuring 10x15mm, the Artemis module has all the supporting circuitry you need to use the fantastic Ambiq Apollo3 processor in your next project. We are proud to say that the SparkFun Artemis module is the first open source hardware module with design files freely and easily available here. We have carefully designed the module so that the implementation of Artemis into your design can be done with low cost 2-layer boards and 8mil trace spacing.
The Artemis module is manufactured in the USA at SparkFun's Boulder manufacturing facility and is designed for consumer products. This makes the Artemis module very different from its Arduino brethren. Are you ready to expand your product? The Artemis grows with you beyond the Uno footprint and the Arduino IDE. In addition, the Artemis features an advanced HAL (Hardware Abstraction Layer) that allows users to push the modern Cortex-M4F architecture to its limits.
The SparkFun Artemis module is fully FCC/IC/CE certified and is available in full tape and reel quantities. With 1M Flash and 384k RAM, you have plenty of room for your code. The Artemis module runs at 48MHz, with a 96MHz turbo mode available, and is also equipped with Bluetooth!
Be sure to check out the different carrier boards we've put together to make exploring the Artemis extremely easy. We encourage you to get started with our designs and create the next amazing product!
Features:
- 1M Flash / 384k RAM
- 48MHz / 96MHz turbo available
- 6uA/MHz (operates less than 5mW at full operation)
- 48 GPIO - all interrupt capable
- 31 PWM channels
- Built in BLE radio and antenna
- 10 ADC channels with 14-bit precision with up to 2.67 million samples per second effective continuous, multi-slot sampling rate
- 2 channel differential ADC
- 2 UARTs
- 6 I2C buses
- 6 SPI buses
- 2/4/8-bit SPI bus
- PDM interface
- I2S interface
- Secure 'Smart Card' interface
- FCC/IC/CE Certified (ID Number 2ASW8-ART3MIS)
- Dimensions: 10mm x 15mm
| Zolltarifnummer: | 85271900 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 5904422352431 |
| Gross Weight (kg): | 0.001 |
| Manufacturer ID: | WRL-15484 |
| Product ID: | WRL-15484 |
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
[email protected]
WEEE number: 17968585
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]
Safety instructions
- Do not use in potentially explosive atmospheres.
- Keep away from water, moisture and high temperatures.
- Avoid direct sunlight to prevent overheating.
- Take care when handling electrical connections, avoid short circuits.
- Maintain safe distances from other electronic devices to minimise interference.
- Never open, convert or modify the device without authorisation.
- Only use compatible power supply units or voltage sources.
- Recycle the product in accordance with local regulations for electronic waste.
- Dispose of batteries/rechargeable batteries, if included, separately and in an environmentally friendly manner.
- Never dispose of electronic waste in household waste.
Login