SparkFun Thing Plus, STM32

Name: SparkFun Thing Plus, STM32
Brand: SparkFun
SKU: DEV-17712
Price: 38.7 EUR
Availability: LimitedAvailability

Product number: DEV-17712

€38.70

Order now and
secure 20 Berrys

Prices incl. VAT plus shipping costs

Pick your accessory

STLINK-V3MODS: Mini debugger/programmer for STM32 with JTAG/SWD and USB interface

€16.10*

Available · 7 piece · 1-3 days

Check quantity

Available immediately

7 piece : 1-3 days

4.96/5 customer reviews for BerryBase

Free shipping from 79€*

Support

Wird oft zusammengekauft

Product information "SparkFun Thing Plus, STM32"

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with a cost-effective and easy-to-use development platform when you need more power in a smaller footprint. This Thing comes flashed with the DFU bootloader, and to make the Thing Plus even easier to use, we've flipped a few pins to make the board Feather compatible. What's more, it utilises our handy Qwiic Connect system, which means no soldering or shielding is required to connect it to the rest of your system!

As mentioned, the STM32F405 processor is based on the powerful ARM®Cortex®-M4 32-bit RISC core and can operate at a frequency of up to 168 MHz. The Cortex-M4 core has a single precision floating point unit (FPU) that supports all ARM instructions and data types for single precision processing. It also implements a full set of DSP instructions and a memory protection unit (MPU) that enhances application security. This processor board utilises the DFU bootloader to upload code and has an extensive range of advanced I/Os and peripherals. In addition to the USB interface and the Qwiic connector, the STM32 Thing Plus offers a 3.3 V regulator and a LiPo charger as well as 16 MB Flash and a microSD slot for expandable memory.

Features:
STM32 General features:

ARM® 32-bit Cortex®-M4 CPU with FPU
- Adaptive real-time accelerator (ART Accelerator?), which enables execution in the 0-wait state from the flash memory
- Clock frequency up to 168 MHz
- Memory protection unit
- 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1)
- DSP instructions
1 Mbyte flash memory
192 KByte SRAM including 64 KByte CCM (Core Coupled Memory) data RAM
Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memory
Clock, reset and supply management
- 1.8 V to 3.6 V application supply and I/Os
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC oscillator with calibration
Low-power operation
- Sleep, stop and standby mode
- VBAT supply for RTC, 20×32 bit backup register + optional 4 KB backup SRAM
Debug mode
- Serial Wire Debug (SWD) & JTAG interfaces
- Cortex-M4 Embedded Trace Macrocell?
Extended connectivity
- USB 2.0 Full-Speed Device/Host/OTG Controller with On-Chip PHY
- USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
- 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

Specific peripherals on STM32 Thing Plus:

UART bus
I2C bus
SPI bus
Up to 15 analogue inputs, two analogue outputs
20 digital I/O pins, 14 PWM-capable
SDIO for microSD card support
JTAG debug support for serial lines
Power Select
LiPo charging circuit
3.3V regulator
128 Mbit SPI Flash

Documents:

Zolltarifnummer:	84733020
Brand:	SparkFun
Country of Origin:	USA
EAN:	4060137071881
Gross Weight (kg):	0.007
Manufacturer ID:	DEV-17712
Product ID:	DEV-17712

Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
[email protected]

WEEE number: 17968585

Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Use the Dev. Board only in accordance with the instructions and technical specifications.
Keep the board away from liquids, moisture and extreme heat.
Avoid static discharges and use appropriate ESD protection measures if necessary.
Never work on the electrical wiring while the board is connected to a power source.
Only allow children to work with the device under supervision as it contains small parts.
Dispose of the product in an environmentally friendly manner at a recognised recycling centre for electronic devices.
Observe local regulations for the disposal of electronics and batteries.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Zubehör

STLINK V3 SET debugger and programmer: For STM8/STM32 MCUs, CAN, GPIO, I2C, JTAG, SPI, SWD, USB

Programming device for microcontrollers: Versatile interfaces and simple connectivity The STLINK-V3SET is a modular debugger and programmer for STM8 and STM32 microcontrollers. It offers a virtual COM port interface and supports SWIM and JTAG/SWD communication. In addition, it has a bridge UART interface on the MB1440 adapter card and can communicate with the host PC via USB. With its modular architecture, the STLINK-V3SET can be expanded with additional modules.It enables communication with the computer via USB and offers a variety of interfaces such as CAN, GPIO, I2C, JTAG, SPI, SWD and USB to ensure flexible and comprehensive use. The connector type includes pin and USB, which makes the device particularly versatile in use. Features at a glance Compatible with STM8 and STM32 microcontrollers Various interfaces: CAN, GPIO, I2C, JTAG, SPI, SWD, USB Simple connectivity with the computer via USB Flexible application options thanks to a wide range of connectors Technical specifications Device type: Programming device for microcontrollers Connection devices: STM8, STM32 Communication: USB Interface: CAN, GPIO, I2C, JTAG, SPI, SWD, USB Connector type: Pin, USB Scope of delivery 1x programming device for microcontrollers

€64.90

Currently not available