Product number: ADA3179 Adafruit

Adafruit Feather M0 RFM96 LoRa Radio - 433MHz

€34.30

Available · 6 piece · 1-3 days

Pin header kit for Feather, 12-pin and 16-pin socket connectors

€1.05

Stacking headers for Feather, 12-pin and 16-pin socket connectors

€1.40

Adafruit Feather M0 RFM96 LoRa Radio - 433MHz

€34.30

Order now and secure 69 Berrys

Product information "Adafruit Feather M0 RFM96 LoRa Radio - 433MHz"

This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call it RadioFruits, our version of a microcontroller with a "Long Range (LoRa)" Packet radio transceiver with inbuilt USB and battery charging. It's an Adafruit Feather M0 with inbuilt 433MHz radio module! Great for creating wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WLAN.

This is the 433MHz radio version - We also sell an 898/915MHz version of the same radio chipset!

At the heart of the Feather M0 is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48MHz and 3.3V logic, the same one used in the Arduino Zero. This chip has a whopping 256K FLASH (8x more than the Atmega328 or 32u4) and 32K RAM (16x as much)! This chip has a built-in USB port, so it has USB to serial program & debug capability built in without needing an FTDI-like chip.

To make it easy to use for portable projects, there is a port for a 3.7V lithium polymer battery and a built-in charging function. You don't need a battery, it will run without one directly via the micro USB port. But if you have a battery, you can take it with you and then connect it to the USB port for charging. The Feather automatically switches to USB power when it is available. We have also connected the battery via a divider to an analogue pin so you can measure and monitor the battery voltage, to detect when you need to recharge.

Here are some handy specifications! Like all Feather M0's you get:

Dimensions: 51mm x 23mm x 8mm without headers soldered in
Light as a feather - 5.8 grams
ATSAMD21G18 @ 48MHz with 3.3V logic/power supply
No EEPROM
3.3V regulator with 500mA peak current output
USB native support, comes with USB bootloader and serial port debugging
You also get plenty of pins - 20 GPIO pins
Hardware serial, hardware I2C, hardware SPI support
8 x PWM pins
10 x analogue inputs
1 x analogue output
Built-in 100mA Lipoly charger with charge status indicator LED
Pin #13 red LED for general flashing
Power supply/power on pin
4 mounting holes
Reset button

This Feather M0 LoRa radio utilises the extra space left to add an RFM9x LoRa 868/915 MHz radio module. These radios are not suitable for transmitting audio or video, but they work quite well for transmitting small data packets when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).

SX127x LoRa® based module with SPI interface
Packet radio with ready-made Arduino libraries
Uses the licence-free ISM bands (ITU "Europe" @ 433MHz and ITU "Americas" @ 900MHz)
+5 to +20 dBm up to 100 mW output power (output power selectable in software)
~300uA at full idle, ~120mA peak at +20dBm transmit, ~40mA at active radio listening.
Simple wire antenna or spot for uFL connection

Our initial tests with default library settings: over 1.2mi/2Km line of sight with wire quarter wave antennas. (With modified settings and directional antennas 20km is possible).

Comes fully assembled and tested, with a USB bootloader that allows you to quickly use it with the Arduino IDE . We also include some pin headers so you can solder it in and plug it into a solderless breadboard. You will need to cut and solder a small piece of wire (any solid or stranded core is fine) to create your antenna .
Lipoly battery and USB cable not included!

Zolltarifnummer:	84733020
Brand:	Adafruit
Country of Origin:	USA
EAN:	5904422354435
Gross Weight (kg):	0.01
Manufacturer ID:	3179
Product ID:	ADA3179

Adafruit

Adafruit – the open-source hardware pioneer

Adafruit Industries was founded in New York in 2005 by MIT engineer Limor Fried and has since become one of the most influential companies in the maker world. Its mission: making electronics understandable and accessible to everyone – with open-source hardware, free tutorials and a community of millions.

Every Adafruit product is designed, tested and manufactured in the company's own factory in New York. The result is boards and modules that are known for their thoughtful design, excellent documentation and reliable software support – from the Feather ecosystem to the STEMMA QT plug-and-play system.

BerryBase is an official Adafruit reseller. Here you will find genuine products and the expertise to get your project off the ground – whether you are just starting out or developing professionally.

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
[email protected]

WEEE number: 20453810

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Only use the product in suitable environments and in accordance with the technical specifications.
Avoid contact with water, moisture or extreme temperatures.
Always disconnect the power supply before working on the circuit.
Do not operate in the vicinity of flammable substances.
Only use with compatible power sources and components to avoid damage.
Do not use if there is visible damage or malfunction.
Do not carry out any unauthorised modifications or repairs.
Avoid electrostatic discharges, always work earthed.
Dispose of in accordance with local regulations for electronic waste.
Do not dispose of in household waste, but dispose of at appropriate collection points.