Wird oft zusammengekauft
Product information
Description
Product information "seeed Grove - UART WiFi v2 (ESP8285)"
Seeed Grove - UART WiFi V2 (ESP8285)
Grove - UART WiFi V2.0 (ESP8285) is a serial transceiver module with an integrated ESP8285 SoC that has TCP/IP protocol stack firmware. This enables a microcontroller to access WLAN networks using simple text commands. The module supports 802.11 b/g/n in the 2.4 GHz band with a data rate of up to 72.2 Mbps and can be used as an access point (AP) or station. It offers WPA/WPA2-PSK and WPS security protocols as well as a configurable MAC/IP address system.
The module is based on the ESP8285, an improved version of the ESP8266, and contains five energy modes (OFF, DEEP_SLEEP, SLEEP, WAKEUP, ON), high cache performance for system optimisation and low power consumption in standby mode.
The Grove-compatible module is pluggable and can be used immediately thanks to pre-installed AT command firmware. It is suitable for microcontroller developments in the field of home automation, wearables, sensor networks, network monitoring and other IoT applications.
The module can be used as a stand-alone application or as a WLAN adapter in host microcontroller designs via SPI/SDIO or I2C/UART interfaces. The fast response time (wake-to-transmit < 2 ms) allows real-time applications with low latency.
Features at a glance
Grove - UART WiFi V2.0 (ESP8285) is a serial transceiver module with an integrated ESP8285 SoC that has TCP/IP protocol stack firmware. This enables a microcontroller to access WLAN networks using simple text commands. The module supports 802.11 b/g/n in the 2.4 GHz band with a data rate of up to 72.2 Mbps and can be used as an access point (AP) or station. It offers WPA/WPA2-PSK and WPS security protocols as well as a configurable MAC/IP address system.
The module is based on the ESP8285, an improved version of the ESP8266, and contains five energy modes (OFF, DEEP_SLEEP, SLEEP, WAKEUP, ON), high cache performance for system optimisation and low power consumption in standby mode.
The Grove-compatible module is pluggable and can be used immediately thanks to pre-installed AT command firmware. It is suitable for microcontroller developments in the field of home automation, wearables, sensor networks, network monitoring and other IoT applications.
The module can be used as a stand-alone application or as a WLAN adapter in host microcontroller designs via SPI/SDIO or I2C/UART interfaces. The fast response time (wake-to-transmit < 2 ms) allows real-time applications with low latency.
Features at a glance
- Integrated ESP8285 WiFi SoC with support for 802.11 b/g/n
- Plug-and-play compatible with Grove system
- Five energy modes, including DEEP_SLEEP
- Security protocols: WPA/WPA2, WPS
- Supports SPI, UART, SDIO interfaces
- Wake-to-transmit within 2 ms
- Arduino
- Seeeduino
- Microcontrollers with UART, SPI or SDIO
- Chip: ESP8285 ESP-07 SoC
- Input voltage: 3 V / 5 V
- Dimensions: 40 mm × 20 mm × 7 mm
- Baud rate: 115200
- Interfaces: UART, SPI, SDIO 1.1/2.0
- Firmware: esp_iot_sdk_v1.1.0 (AT commands)
- WLAN frequency: 2.4-2.4835 GHz
- WLAN modes: Access point and station
- Output power: +19.5 dBm in 802.11b mode
- Standby consumption: < 1.0 mW (DTIM=3)
- Leakage current in power-down mode: < 10 µA
- Supported protocols: TCP/IP, WEP, WPA/WPA2, TKIP, AES, WAPI
- No battery included
- 1x Grove - UART WiFi V2 (ESP8285)
- 1x Grove cable
Properties
| Zolltarifnummer: | 84733080 |
|---|---|
| Brand: | seeed |
| Country of Origin: | China |
| EAN: | 4060137090974 |
| Gross Weight (kg): | 0.010 |
| Manufacturer ID: | 113020011 |
| Product ID: | SE-113020011 |
Manufacturer and safety information
Manufacturer information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
Safety instructions
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
Safety instructions
- Do not use in potentially explosive atmospheres.
- Keep away from water, moisture and high temperatures.
- Avoid direct sunlight to prevent overheating.
- Take care when handling electrical connections, avoid short circuits.
- Maintain safe distances from other electronic devices to minimise interference.
- Never open, convert or modify the device without authorisation.
- Only use compatible power supply units or voltage sources.
- Recycle the product in accordance with local regulations for electronic waste.
- Dispose of batteries/rechargeable batteries, if included, separately and in an environmentally friendly manner.
- Never dispose of electronic waste in household waste.
Reviews
0
Login
Skip product gallery
Cutsomers also bought
Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board
€7.50
Diese Wireless Variante Raspberry Pi Pico 2 W bietet 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2, mit integrierter Antenne.
Raspberry Pi Pico 2 ist ein Mikrocontroller-Board, basierend auf dem RP2350: einem leistungsstarken und sicheren Mikrocontroller. Mit höherer Kern-Taktfrequenz, verdoppeltem On-Chip-SRAM, doppeltem On-Board-Flash-Speicher, leistungsfähigeren Arm-Kernen, optionalen RISC-V-Kernen, neuen Sicherheitsfunktionen und verbesserten Schnittstellenfähigkeiten bietet der Raspberry Pi Pico 2 eine erhebliche Leistungs- und Funktionssteigerung, während die Hardware- und Softwarekompatibilität mit früheren Mitgliedern der Raspberry Pi Pico-Serie erhalten bleibt.
RP2350 bietet eine umfassende Sicherheitsarchitektur, basierend auf Arm TrustZone für Cortex-M, und umfasst signiertes Booten, 8 KB Antifuse-OTP zur Schlüsselspeicherung, SHA-256-Beschleunigung, einen Hardware-TRNG und schnelle Störungsdetektoren. Diese Funktionen, einschließlich des sicheren Boot-ROMs, sind ausführlich dokumentiert und allen Benutzern uneingeschränkt zugänglich. Dieser transparente Ansatz, der im Gegensatz zur „Sicherheit durch Verschleierung“ steht, die von herkömmlichen Anbietern angeboten wird, ermöglicht professionellen Nutzern, RP2350 und Raspberry Pi Pico 2 mit Vertrauen in ihre Produkte zu integrieren.
Die einzigartige Dual-Core, Dual-Architektur-Fähigkeit des RP2350 ermöglicht die Wahl zwischen einem Paar industrieüblicher Arm Cortex-M33-Kerne und einem Paar Open-Hardware Hazard3 RISC-V-Kerne. Programmierbar in C / C++ und Python sowie mit detaillierter Dokumentation ausgestattet, ist der Raspberry Pi Pico 2 das ideale Mikrocontroller-Board für Enthusiasten und professionelle Entwickler gleichermaßen.
Technische Daten
Formfaktor: 21 mm × 51 mm
CPU: Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren @ 150 MHz
Speicher: 520 KB On-Chip-SRAM; 4 MB On-Board-QSPI-Flash
Schnittstellen: 26 universelle GPIO-Pins, einschließlich 4 ADC-fähigen Pins
Peripherie:
2 × UART
2 × SPI-Controller
2 × I2C-Controller
24 × PWM-Kanäle
1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung
12 × PIO-Zustandsmaschinen
Konnektivität: 2.4GHz 802.11n Wireless LAN und Bluetooth 5.2
Eingangsspannung: 1,8–5,5V DC
Betriebstemperatur: -20°C bis +85°C
Produktionsdauer: Raspberry Pi Pico 2 bleibt mindestens bis Januar 2040 in Produktion
Downloads
Raspberry Pi Pico 2 Product Brief
Raspberry Pi Pico 2 MicroPython SDK
Raspberry Pi Pico 2 C/C++ SDK
RP2350 Datenblatt
Available · 100+ piece · 1-3 days
IRLB8721PBF - N-channel MOSFET transistor, 30V, 62A, TO-220AB, 3-pin
€1.25
IRLB8721PBF - N-channel MOSFET transistor, 30V, 62A, TO-220AB, 3-pin
The IRLB8721PBF is an N-channel MOSFET transistor with a drain-source voltage of 30V and a maximum drain current of 62A. It is ideal for applications where high currents and low voltages are required. The TO-220AB housing enables easy mounting and optimum heat dissipation. This transistor offers an output of 65W and is characterised by a low resistance in the conduction state of 8.7mΩ.
Features at a glance
High drain current: The transistor can handle up to 62A, ideal for power-intensive applications
Low resistance: With a resistance of only 8.7mΩ in the conduction state, efficiency is increased and power loss is minimised.
Technical data
Transistor type: N-MOSFET
Polarisation: unipolar
Transistor type: logic level
Drain-source voltage: 30V
Drain current: 62A
Power: 65W
Package: TO220AB
Gate-source voltage: ±20V
Resistance in conduction state: 8.7mΩ
Thermal resistance connection - housing: 2.3K/W
Mounting: THT
Gate charge: 7.6nC
Scope of delivery
1 x IRLB8721PBF N-channel MOSFET transistor
Available · 86 piece · 1-3 days
525-piece metal layer resistor assortment in plastic box
€7.90
525-piece metal film resistor assortment in plastic box
The 525-piece metal film resistor assortment has been specially developed for electronics enthusiasts and hobbyists and offers a comprehensive range of resistor values that are required in numerous electronic applications. With resistors from 0Ω to 1MΩ, the set covers all common requirements. The high precision with a tolerance of just 1% ensures that each component delivers reliable and accurate results. In addition, the components are packaged in a clear plastic box with a colour code table for easy storage and quick access, simplifying organisation and handling.
Features at a glance
Compatibility: RoHS compatible, ideal for various electronics projects.
Convenient handling: Resistors are clearly organised in a plastic box.
Reliability: 1% tolerance on all resistors ensures precise applications.
Technical data
Type: Metal film resistors
Power: 1/4 W
Tolerance: 1%
Colour code table included
RoHS compatible
Scope of delivery
525-piece metal film resistor assortment in plastic box:
25x 0Ω ±1%
25x 10Ω ±1%
25x 20Ω ±1%
25x 47Ω ±1%
25x 470Ω ±1%
25x 2.2kΩ ±1%
25x 4.7kΩ ±1%
25x 22kΩ ±1%
25x 47kΩ ±1%
25x 100kΩ ±1%
25x 220kΩ ±1%
25x 470kΩ ±1%
25x 1MΩ ±1%
50x 100Ω ±1%
50x 220Ω ±1%
50x 1kΩ ±1%
50x 10kΩ ±1%
Available · 20 piece · 1-3 days
NeoPixel Square 8x8 matrix with 64 WS2812 5050 RGB LEDs
€8.70
This small, intelligent RGB LED matrix with 64 LEDs of type WS2812 can be controlled with a microcontroller, for example an Arduino.
Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel
Technical data:
Operating voltage: 4 - 7 V
LED dimensions: 5 x 5 x 1.50 mm
Dimensions: 65 x 65 3 mm
Height: 3.15 mm
Available · 94 piece · 1-3 days
1N4001 - Rectifier diode, THT, 50V, 1A, DO41
€0.08
1N4001 - Rectifier diode, THT, 50V, 1A, DO41
This rectifier diode is suitable for through-hole mounting (THT) and supports a maximum reverse voltage of 50V with a forward current of 1A. Thanks to its robust design in the DO41 housing and high performance with a maximum forward current of 5.4A, it is ideal for a wide range of applications in electronics.
Features at a glanceHigh reliability: maximum forward current load of 5.4A and pulse current capacity of 30A.Energy efficiency: minimum forward voltage of only 1.1V reduces energy losses.
Technical specifications
Diode type: Rectifier
Mounting: THT
Maximum reverse voltage: 50V
Forward current: 1A
Forward current max.: 5.4A
Semiconductor structure: single diode
Max. pulse current: 30A
Housing: DO41
Forward voltage max.: 1.1V
Leakage current: 50µA
Standby time: 1.5µs
Other data
Ideally suited for high-frequency applications and energy conversion
Scope of delivery
1x 1N4001 rectifier diode
Available · 100+ piece · 1-3 days
DC panel jack for barrel connector 5.5x2.1mm - solder connection
€1.15
DC panel jack for hollow plug 5.5x2.1mm - solder connection
Discover the versatile DC panel jack for hollow plug 5.5x2.1mm with solder connection, which offers diR a flexible solution for customised cable assemblies and the replacement of defective connectors. With its closed design and a stable pin of 2.1 mm, this socket is ideal for use in a wide range of applications in the AV sector, electronic household appliances and multimedia applications. For hobbyists and amateur electronics engineers, this socket offers a reliable solution for your project requirements.
Features at a glance
For individual cable length assembly or for replacing a defective built-in DC connector
Closed design with solder connection, 2.1 mm pin
Suitable for AV sector, electronic household appliances and multimedia applications
Technical specifications
Connector size: 5.5x2.1 mm
Connection type: Solder connection
Number of pins: 3
Intended use: Audio/video devices, cameras, televisions, electronic scales, fitness equipment, etc.
Scope of delivery
1x DC panel jack for barrel connector 5.5x2.1 mm - solder connection
Available · 88 piece · 1-3 days
Arduino Uno Starter Kit
€34.90
Arduino Uno Starter Kit - Versatile starter kit for Arduino projects The Arduino Uno Starter Kit offers a comprehensive collection of components, ideal for beginners and advanced users who want to immerse themselves in the world of electronics. Equipped with everything you need, this kit allows you to build a variety of projects, from simple light-emitting diode experiments to complex control systems. Features at a glance
Complete set: Contains an Arduino Uno, a large breadboard, various sensors and actuators, allowing you to get started quickly without the need for additional purchases.
Various sensors and modules: RFID set, real-time clock, temperature and humidity sensors open up a wide range of experimental possibilities.
Additional components: motors, displays, buttons and a wide range of passive components such as resistors and LEDs round off the kit.
Technical data
Arduino Uno (compatible) including USB cable
830-pin breadboard/plug-in board
Dupont cable 40 pin female-female, 65 jumper cables in various lengths
RFID set with dongle, card and module
7-segment displays, dot-matrix module, DS1302 real-time clock module
Servo motor, stepper motor with control board, joystick module
IR receiver, relay module (10A, 250V, AC), matrix keypad
Various sensors: Soil moisture, DHT11 temperature & humidity, sound sensor, RGB LED, LM35 temperature sensor
Piezo buzzer, mini speaker capsule, flame sensor, vibration switch
Resistors: 30 pieces (10x 220Ω, 10x 1K, 10x 10K)
Adapter cable for 9V battery
Other data
Supplied in a robust assortment box that ensures safe storage and organisation of the components
Scope of delivery
Compatible Arduino Uno incl. USB cable
830 pin breadboard/plug-in board
Dupont cable 40 pin female-female
65 jumper cables in various lengths
RFID set, consisting of dongle, card and module
7-segment display, 4-digit
7-segment display, 1-digit
8x8 dot-matrix module
DS1302 Real-time clock module
Joystick module
Stepper motor with control board
1602 Display
Servo motor
IR receiver with IR remote control
Relay module, 10A, 250V, AC
16 buttons (4x4) Matrix keypad
Soil moisture sensor
DHT11 temperature & humidity sensor
Sound sensor
RGB LED module
4 buttons with push-on cap
Potentiometer
IC 74HC595N
3 photoresistors
LM35 temperature sensor
15 LEDs (5 each in the colours yellow, red, blue)
Piezo buzzer
Mini loudspeaker capsule
Flame sensor
2 vibration switches
30 resistors (10x 220Ω, 1K, 10K each)
Adapter cable 9V battery clip - hollow plug 5.5x2.1mm
Links
To the BerryBase blog
Available · 100+ piece · 1-3 days
New
microSD / T-Flash to microSD extension 50cm
€3.80
Brief description This extension cable can be used to extend a micro SD interface. The extension can be easily installed thanks to the flexible cable.Ideal for use on the Raspberry Pi, for example, if the Raspberry Pi is installed but the memory card should still be accessible.Technical data Connections: micro SD plug > micro SD socket / slot (with push/eject function)For micro SD cardsFPC cableGold-plated contactsColourCable: whiteConnecting elements: blackCable length: approx. 40cm
Available · 68 piece · 1-3 days
PCWork PCW08J Precision screwdriver set, case, 89 parts
€29.90
PCW08J Precision screwdriver set - 89 parts
The PCW08J precision screwdriver set is an extremely versatile set that contains 66 high-quality bits made from robust S2 or chrome vanadium steel. These materials guarantee maximum durability and resistance and make the set ideal for a wide range of repairs, such as on smartphones, tablets, drones or computers. The set also includes a magnetised aluminium hand holder with an ergonomic design and a flexible extension rod that makes it easy to reach hard-to-reach areas. The high-quality workmanship makes this set the perfect choice for professional users and technology enthusiasts.
Features at a glance
66 high-quality bits made from S2 or chrome vanadium steel for durability and resistance
Magnetised aluminium hand holder with ergonomic design for comfortable working
Includes flexible extension rod for hard-to-reach areas
Perfect for repairs on smartphones, tablets, drones and computers
Technical specifications
Number of bits: 66
Material of the bits: S2 steel, chrome vanadium steel
Hand holder: Magnetised, aluminium
Ergonomics: 360° rotatable cap, ergonomic design
Extension rod: Flexible, stainless steel
Other data
German brand: PCWork, complies with all EU safety standards
Practical transport bag for stylish and safe storage
Scope of delivery
1x aluminium hand holder
1x stainless steel extension rod
1x ESD-10 round tweezers
1x ESD-13 tweezers with pointed tip
1x ESD-15 tweezers with curved tip
1x Antistatic cross tweezers made of stainless steel
1x Antistatic (ESD) wrist strap
3x double-ended short plastic crowbar
2x double-ended long plastic crowbar
1x double-ended chrome-plated metal lifting rod
1x metal crowbar in knife shape made of stainless steel
1x handle suction cup
3x opening tools
1x mini steel ruler
1x transport bag
Available · 5 piece · 1-3 days
Rosin flux 20g tin
€1.98
Product overview
This rosin flux is specially designed for soldering work. It is activated by adipic acid and offers improved flow properties of the solder. The resin form in 20ml packaging is ideal for precise soldering work in electronics production and repair.
Features at a glance
Flux type: Rosin, in resin form, provides efficient wetting and clean solder joints.
Capacity: 20ml, perfect for smaller projects or occasional repairs.
Activated by adipic acid (2.5%), improves the flow properties of the solder.
Particularly suitable for precise soldering work and the production of electronic circuits.
Specifications
Technical Data
Flux type
Rosin
Mould
Resin
Capacity
20ml
Properties of the soldering device
Activated by adipic acid (2.5%)
Warning keyword
Caution
Hazard statements
H317: May cause an allergic skin reaction.
Precautionary statements
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P272: Do not wear contaminated work clothing outside the workplace.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P363: Wash contaminated clothing before reuse.
P501: Dispose of contents/container.
GHS code
GHS07
Flux residues
Amber, yes
Scope of delivery
1x rosin flux, 20ml
Available · 33 piece · 1-3 days
iFixit tool set for levering and opening
€11.90
Conventional tools won't get you very far with many repairs, as the housings and components of many devices are usually not simply screwed on, but have to be prised open. A screwdriver could also be used for this - but it could damage your device.
Open sesame:Tool set for levering and opening
It's better to go straight for the right special tool made of flexible but robust plastic - just like the one we've put together in the tool set for levering and opening. Here you'll find the right tools to get into even the smallest of gaps, allowing you to dismantle and remove safely.
Whether you want to open the housing of your VW spanner, refurbish your Pfaff sewing machine or loosen sensitive push-fit and plug connections on the latest electronic devices - you'll have the right tools to hand. Even for your children, the tool set makes you the ultimate separator of unruly Lego bricks.
Complete your toolbox with practical lever tools
For DIY enthusiasts, the tool set for levering and opening is a useful addition to make your toolset fit for electronics repairs - and beginners also get everything they need to take their first steps into the DIY world. Whether you're an expert or a beginner - repairing is worthwhile for your wallet, for Mother Nature and for the good feeling of tackling things yourself.
Your benefits at a glance
All opening tools for repairing electronics in one set
No more scratches or damage when opening
Easy on your wallet and the environment
Lifetime guarantee(What does that mean?)
Kit contents
Spudger: With the spudger, you can effortlessly apply great leverage and open even stubborn housings without scratching. Its punctured end reaches deep inside electronic devices.
Halberd Spudger: The Halberd Spudger has a wide edge made of very flat plastic for larger push-fit and plug-in connections. With its hook, you can get sensitive cables out of the way.
iFixit opening tool: Our all-rounder for opening, levering and lifting. With a particularly non-slip handle.
Plastic cards: So you don't have to search your wallet for expired plastic cards. With extra wide edge for large-area pressure build-up.
Picks: Useful for any glued or clipped device to keep open areas that have already been released.
Specifications
Dimensions
102 x 6 x 243mm
Available · 3 piece · 1-3 days
Electronic print pliers, side cutters
€5.90
For cutting off protruding wire ends, even on assembled PCBs. Cuts powerfully and flush (without bevel). With insulated handles and return spring for comfortable working. Very suitable for plastic modelling.- 130 mm- 58 g
Available · 2 piece · 1-3 days
Skip product gallery
More Products from +++ seeed +++ to look at
seeed Acryl-Seitenpaneele für NVIDIA Jetson Nano, re_computer Gehäuse, 1mm, Abstandshalter, schwarz
€2.50
Available · 8 piece · 1-3 days
Seeed Crazyflie AI-deck V1.1, GAP8 RISC-V MCU, ESP32 WiFi, UART, ML, for drones, 5V
€189.90
Available · 4 piece · 1-3 days
seeed Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
€68.80
Currently not available
seeed Grove - 2.13" ePaper / E-Ink display, three-coloured (red / black / white)
€21.20
Currently not available
%
seeed Grove - 3-axis analogue accelerometer ±20g, ADXL356B
€70.90
€79.00
(10.25% saved)
Currently not available
%
seeed Grove - 3-Axis Analogue Accelerometer ±40g (ADXL356C)
€70.90
€80.90
(12.36% saved)
Available · 2 piece · 1-3 days
seeed Grove - 3-Axis Digital Accelerometer ±16g, Ultra-low Power (BMA400)
€9.10
Available · 3 piece · 1-3 days
seeed Grove - 3-in-1 CO2, Temperature & Humidity Sensor (SCD30)
€56.90
Available · 1 piece · 1-3 days
